| Model |
SCB290-HN5 |
| Signal System |
NTSC
|
PAL |
| Image system |
| Imaging area |
4.9mm x 3.7mm |
| Image pickup device |
1/3"-type vertical double density interline CCD |
| Effective pixels(HxV) |
768 x 494 |
752 x 582 |
| Electric |
| Scanning system |
2:1 Interlace V: 59.94Hz, |
2:1 Interlace V: 50Hz, |
| H: 15.734KHz |
H: 15.625KHz |
| Sync system |
Internal / linelock |
Horizontal resolution
|
540/600 TV lines (day/night mode) |
Dynamic range
|
CS with backfocus |
Lens mount
|
CS |
Digital zoom
|
2X |
Digital pan, tilt
|
YES |
| Gamma correction |
0.45 / 1.0 selectable |
| Minimum illumination |
Day: 0.018 lux/ Night: 0.0045 lux (F1.4, AGC on, 10 IRE) |
Day: 0.29 lux/ Night: 0.07 lux (F1.4, AGC on, 50 IRE) |
|
| S/N ratio |
More than 50dB (AGC off) |
| Iris control |
Video / DC driver |
| Gain control |
Auto(normal / turbo/OFF) |
| White balance |
ATW1 / ATW2 / manual |
| Electric shutter |
Auto 1/60(1/50) to 1/120,000sec. / manual |
| Auto slow shutter from 0.04 sec. to up to 5.3 sec. |
BLC
|
BLC1 / BLC2 / BLC3/ BLC4 / User define / off |
Privacy zone
|
On / off, up to 8 zones |
Day/Night mode
|
Auto / manual/B.C.G |
OSD
|
Yes |
Remote control
|
Pelco-P, Pelco-D via RS485(RJ45) interface |
| Remote control via computer with remote controller software |
| Video output |
1Vpp composite output, 75 ohm |
| Power supply |
| Power requirement |
DC12V / AC24V |
AC90~260 or DC12V / AC24V |
| Power consumption |
10W (max.) |
| Environment |
Operating temperature
|
-10ºC ~ 50º |
Operating humidity
|
30% ~ 90% RH |
Storage temperature
|
-20ºC ~ 60ºC |
| ..Mechanism |
Dimensions(WxHxD)
|
66mm x 55mm x 130mm |
| (2.6" x 2.16" x 5.11") |
Weight
|
500g approx. |
|
Ordering information |
SCB290-HN5 |
SCB290-HP5 or SCB290-HP7 |
